1 / 1
A) Removing the lefthand guards
The front left-hand guard (1) is fixed to the cutting
deck by a screw (2) and a pin (3) inserted in an inner
eyelet (4).
Unscrew the screw (2) and pull the guard (1) forward
enough to release the pin (3) from the eyelet (4).
IMPORTANT
- When mounting please make sure the
pin (3) remains inserted in the eyelet (4) correctly and
that the guard is fixed stably.
The rear left-hand guard (5) is screwed (6) to the
frame.
NOTE When mounting, make sure the register
(7) remains outside of the guard (5).
B) Removing the righthand guard
The right-hand guard (11) is fixed by the screw (12)
and fastener tooth (13), inserted in a specific seat.
IMPORTANT
When mounting please make sure the
tooth (13) is hooked correctly and that the guard is
fixed stably.
General informations
Removing the side guards allows you to reach the
blade control belt and parts regulating the cutting
deck and blade engagement.
Related topics
---
Tightening torques
2 6 12
Guards fastening screws ..... 2,5 ÷ 3,5 Nm
5.2
.1
REMOVAL OF THE SIDE GUARDS
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
