2 / 3
5.3.
2
REMOVAL
OF THE WHEEL COVER
General informations
You need to remove the wheel cover completely
to replace it, to remove the engine and tank and to
access the seat’s microswitch, placed under the
crosspiece supporting the two springs.
Related topics
Replacing the accelerator
B) Sides
The sides (11) (both left and right) are each fixed by:
– 1 screw on the rear part (12);
– 1 screw on the front part (13);
– 1 screw on the lower part (14);
– 1 side fin (15), hooked to the central element
and released using a screwdriver.
When mounting, be careful to insert the side fin (15)
correctly.
C) Central element
• Disconnect the accelerator cable.
Remove the covering caps (21), unscrew the two nuts
(22) taking care to keep the crinkled washer (22a) and
remove the seat with its relative support plate (23).
Remove the closing panel (24).
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
