1 / 1
6.7.
0
REPLACING
THE ACCELERATOR AND
ADJUSTING THE CARBURETTOR
General informations
Related topics
---
Unscrew the screw (1), disassemble the knob (2) and
unscrew the two screws (3), on the adhesive label (4),
holding the accelerator to the wheel cover.
From the engine side, loosen the terminal screw (5),
disconnect the wire (7) terminal (6) from the lever (8)
and remove the accelerator with the wire.
To assemble, put the accelerator lever in «MIN» and
connect the wire (7) terminal (6) to the lever (8).
Move the lever (8) to the specific «MIN» position for
each type of engine and indicated in the relevant in-
struction booklet. Then secure the wire (7) to the ter-
minal (5).
When mounting, always replace the adhesive label
(4), as its presence and integrity are fundamental for
correct engine use.
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
