Global garden products MJ66, Workshop Manual

Page: 40 / 88

MAP
1 / 2
5.5.
2
REMOVAL OF THE ENGINE
General informations
Since there are different types of drive, the stages
de scribed here refer to those shared or similar in all
types of engine.
Related topics
[ 2.2] Tools
[ 5.2] Removal of the side guards
[ 5.3] Removal of the wheel cover
[ 5.8] Removal of the discharge conveyor
[ 6.3] Replacement of the drive belt
[ 6.7] Replacing the accelerator
Tightening torques
2 Cross-tie fastening nuts ................... 25 ÷ 30 Nm
4 Arbor fastening nuts ........................ 25 ÷ 30 Nm
6 Screw for pulley ............................... 30 ÷ 35 Nm
– Screws for engine fastening ............ 50 ÷ 55 Nm
• Remove the collector channel
• Remove the left and right side guards.
• Remove all wheel cover parts.
• Remove the drive belt
• Disconnect the accelerator cable.
Detach the fuel tube, taking care not to cause any
leakage.
Disconnect all electric and earthing connections from
the engine making sure you label them so no errors
can be made when they have to be reconnected.
Disconnect the two connectors (1) of the seat micro-
switch.
Unscrew the nuts (2) and remove the cross-tie (3).
Unscrew the 4 nuts (4) and remove the left-hand arbor
(5) to make the engine accessible.
Free the blade control belt (6) from the pulley (7).
MODEL YEAR 2015
MJ66-Hy MJ66
WORKSHOP MANUAL
BACK