1 / 3
5.3.
2
REMOVAL
OF THE WHEEL COVER
NOTE
- The wheel cover has two different connected
parts which must be dismantled in the sequence
shown.
A) Rear
Unscrew the tank cap (1) and remove the fuel guard
(2).
The rear part (3) of the wheel cover is fixed to the
frame by:
– 2 screws (4) in the space under the seat;
– 2 rear screws (5).
Fixing the wheel cover’s rear part (3) is completed by
5 screws (6) on the rear plate.
NOTE
- Removing the rear part (3) is facilitated by
widening the two side elements slightly and lifting the
rear part just enough to disconnect the three fins (7).
General informations
You need to remove the wheel cover completely
to replace it, to remove the engine and tank and to
access the seat’s microswitch, placed under the
crosspiece supporting the two springs.
Related topics
Replacing the accelerator
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
