3 / 3
5.3.
2
REMOVAL
OF THE WHEEL COVER
General informations
You need to remove the wheel cover completely
to replace it, to remove the engine and tank and to
access the seat’s microswitch, placed under the
crosspiece supporting the two springs.
Related topics
Replacing the accelerator
Disconnect and remove the battery (25) charger con-
nector (26), the fuse holder (27) and pull out the wire
and connector (28).
Disconnect ignition block wire connectors.
Remove the central cover (29) fixed with two screws
(30).
The wheel cover central element (31) is fixed by:
– 2 screws on the front lower part (32);
– 2 screws on the side lower part (33);
– 2 screws on the rear part (34);
– 2 screws in the space under the seat (35);
To remove the cover, unscrew the rear screw (36) fix-
ing the upper part of the fuel tank.
To assemble, follow the steps described in reverse
order.
Connect ignition block wire connectors.
• Reattach the accelerator cable.
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
