Glentek Inc. 208 Standard Street, El Segundo, California 90245, U.S.A. (310) 322-3026
8
Omega Series Digital PWM Amplifier Manual
Digital I/O Setup
The Digital I/O settings can be used to tailor
the amplifier’s digital signal inputs to the re-
quirements of your application. Failure to
properly setup the Digital I/O signals may re-
sult in the amplifier powering up in a fault con-
dition. To view this dialog, select the “Setup”
option on MotionMaestro’s
©
main menu tool
bar, then select “Digital IO...”. Digital I/O sig-
nals can be active high or active low depend-
ing on the applications.
On this window there are two sets of check-
boxes, for each signal, Wkg and Amp. Amp
displays the current amp setting while Wkg dis-
plays the users choice. The amp is automati-
cally updated as the Wkg box changes.
If “Wkg Amp Disable” is checked when one of
the digital inputs is activated, the amplifier will
send a message to the SynqNet® controller, and have the SynqNet® controller take an action . In con-
trast, if “Wkg Amp Disable” is not checked, the amplifier will take an action before the digital input mes-
sage reaches the controller.
Note: It is highly recommended to check “Wkg Amp Disable” boxes, and have the SynqNet®
controller control all the digital inputs.
Amplifier Mode Setup
The default mode for SynqNet® amplifiers is current mode.
Dialog box for setting amplifier mode.
Dialog box for setting Digital I/O
Summary of Contents for Omega SMC9930
Page 73: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 73 Appendix K...
Page 75: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 75 Appendix K...
Page 77: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 77...
