Glentek Inc. 208 Standard Street, El Segundo, California 90245, U.S.A. (310) 322-3026
33
Warnings
This section lists all warning code/bit definitions and corresponding ACSII test messages. This section also
specifies the node specific retrieval algorithm:
Retrieval
Information
Warning Read:
(Direct Command 0x0A per page 34)
Returns a 16 bit warning word.
Warning Clear:
(Direct Command 0x0B per page 34)
Warnings (and the warning flag) are latching; the warning code is held in a register until cleared.
Warning Count:
(Direct Command 0x0B per page 34)
Always reads as “1”; all Warnings are bit-mapped into one composite warning word.
Definitions
Note: Balancing is normally carried out once at the factory.
Warning Bit
Message
15
Motor Over Speed
11
Balancing current loops
10
Current Foldback Active
2
Phase-Finding required
0
Bus Under-Voltage
1,3-9,12-14
Reserved
SynqNet® Setup
Summary of Contents for Omega SMC9930
Page 73: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 73 Appendix K...
Page 75: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 75 Appendix K...
Page 77: ...Glentek Inc 208 Standard Street El Segundo California 90245 U S A 310 322 3026 77...
