FD 10
0549-990-01---10a_2019.11.indd
Joystick
Display
dAxis
5cm
Ao
95°
Press
Down
Rod
STD-PH
dAxis
–
+
Low En
OFF
Width
85 cm
Weight
75 kg
0549-990/02a
Page 31 of 69
Mounting and operating instructions
7 COMMISSIONING
Warning:
During the setting-up procedure (which must only be carried out by experts), the safety
devices (radar, sensors, ...) are switched off!
Before initiating the setting-up procedure, it is important to make sure that neither
persons nor objects remain within the danger area of the moving door leaf, in order to
avoid injuries or damages!
Procedure:
1. Switch on the drive mechanism on the side cover
(Power-up).
2. Using the joystick, adjust the display direction: Move the joystick
downward once
the display direction is switched to a readable
position.
3. Programming the type of rod assembly Rod:
Move the joystick to the left/to the right (see parameter chap
-
ter
7.1
). Validate the correct type of rod assembly by means of OK:
In the rest position, shortly push in the joystick.
4. Adjust the distance dAxis (distance in cm between the rotation axis
of the door hinges and the mounting level of the drive mechanism
see illustration below).
Note:
dAxis is an approximate value. Depending on the installation
situation, dAxis may have to be adapted.
5. Adjust the opening angle Ao and validate by means of OK.
Attention:
The steps 4 and 5 are influenced by the installation measures/
distance between the door hinges.
6. If existing:
Select Low Energy (low energy operation) and confirm with OK.
If you have selected Low Energy: Enter the door leaf width and
weight settings and confirm with OK.