GILGEN 0549-010 Mounting And Operating Instructions Download

Page: 49 / 78

FD 10

0549-990-01---10a_2019.11.indd

5 Nm

0549-990/02a

Page 49 of 69

Mounting and operating instructions

8.2

Fundamental checking

Warning:

Electrocution hazard! Before working on any live elements, pull out the mains plug

respectively switch off the main installation switch!

1. Dismount the covering of the drive mecha

nism.

2. Check all the cable connections.

3. Normal rods:

Separate the rotating arm (A) from the rod

arm (B) by loosen the screw (C).

4. Check the free running movement of the

door leaf.

5. Check the bearings of the drive mechanism

for increased noise level.

6. Normal rods:

Fasten the rotating arm (A), by means of the screw (C) to the rod arm (B)



Tightening mo

ment

5 Nm

7. Mount the covering of the drive mechanism.

Summary of Contents for 0549-010















































































Search results

Summary of Contents for 0549-010

Reviews:

Related manuals for 0549-010

Brands by name

Popular brands

GILGEN 0549-010, Mounting And Operating Instructions

Search results

Summary of Contents for 0549-010

Reviews:

Related manuals for 0549-010

Brands by name

Popular brands