GILGEN 0549-010 Mounting And Operating Instructions Download

Page: 58 / 78

FD 10

0549-990-01---10a_2019.11.indd

0549-990/02a

Page 58 of 69

Mounting and operating instructions

13 OPTIONS

13.1

D-BEDIX

The different operating modes can be directly

enabled by means of the D-BEDIX. In addition, it

provides easy programming of the most impor

tant door settings.

The operating modes, menu settings as well as

possible errors are displayed in a clearly ar

ranged synopsis.

The D-BEDIX is connected to the control unit

FD 10 via a screened two-core connection cable

(e.g. U72M or EIB-Y(St)Y, max. length 50 m).

Only one D-BEDIX can be connected per door

installation.

13.1.1 Keys

C-key (Cancel)

• Exit the menu

• Invalidate entry.
OK-key

• Confirm the selection

• Confirm the entry.
Arrow keys

• Navigate within the menus

• Short simultaneous actuation of both keys = acces to the menu level.

13.1.2

Symbols

Operating mode symbols

• Show the possible operating modes

(see chapter: Operating modes).

Selection frame (active and preselected operating mode)

• Shows what has been presently selected.

Selection frame (active operating mode)

• Shows what has been presently selected but is still inhibited. A control

element with higher priority (e.g. key-operated switch) determines the

operating mode.

Bar (preselected operating mode)

• Shows the preselected operating mode.

Summary of Contents for 0549-010















































































Search results

Summary of Contents for 0549-010

Reviews:

Related manuals for 0549-010

Brands by name

Popular brands

GILGEN 0549-010, Mounting And Operating Instructions

Search results

Summary of Contents for 0549-010

Reviews:

Related manuals for 0549-010

Brands by name

Popular brands