FD 10
0549-990-01---10a_2019.11.indd
HSK
NSK
GSK
0549-990/02a
Page 6 of 69
Mounting and operating instructions
2 SAFETY
2.1
Appropriate use
The swing door drive mechanism FD 10 has been exclusively designed for operating swing doors.
Any other use beyond these application limits is deemed inappropriate and inadmissible! In the
event of an inappropriate use of this system, the safety of the user may be jeopar dized and/or the
installation be damaged. The manufacturer declines all responsibility for these injuries/damages!
2.2
Safety notices
The present instructions uses the following symbols and notes in order to point out certain resi
-
dual dangers:
Warning:
Involving danger to life and limb.
Attention:
A situation where material could be damaged or the function impaired.
Note:
Hints which facilitate the work.
2.3
Safety regulations
2.3.1 Principles
• Children must not be involved in the cleaning or user maintenance of this system. Very young
children must not operate the system. Young children must only operate the system when
under the close supervision of an adult. Older children and vulnerable persons may use this sys
-
tem safely once they have been shown, while under suitable supervision, how to use it approp
-
riately.
Highly vulnerable persons can only use the system safely when under close supervision, or if it
is fitted with corresponding additional equipment that amply fulfils the scope-of-use standards
of the norm EN 16005.
• According to standard EN 16005 describing
the safety-related requirements for automatic
door systems, a risk evaluation is to be carried
out (in consideration of the groups of door
users and the local situation). This is the basis
for the choice of the different protecting mea
-
sures. The risk evaluation has to be carried out
already during the planning stage to guarantee
that the automatic door system can be safely
installed and operated (see Risk evaluation for
automatic swing door P 01.02.20).
NSK Secondary closing edge
HSK Main closing edge
GSK Opposing closing edge
