manualshive.com logo in svg

GILGEN 0549-010, Mounting And Operating Instructions

Share
Download
GILGEN 0549-010 Mounting And Operating Instructions Download Page 46

FD 10

0549-990-01---10a_2019.11.indd

0549-326 Alu

0549-311 Inox

0549-331 Alu

0549-336 Inox

0549-332 Alu

0549-337 Inox

A

B

C

D

0610-503

0549-990/02a

Page 46 of 69

Mounting and operating instructions

7.5 

Mount the drive mechanism covering

Material:

1  Covering 

0549-326 

Aluminium

1  Covering accessories 

0549-105 

Aluminium

1  Gilgen-Logo 

0610-503 

Set 0549-997/01

or

1  Covering 

0549-311 

Stainless steel

1  Covering accessories 

0549-109 

Stainless steel

1  Gilgen-Logo 

0610-503 

Set 0549-997/01

Procedure:

1.  Attach the Gilgen Logo:

a)  Degrease the gluing surface on the covering.

b)  Remove the white cover sheeting of the sticker (D).

c)  Position the template (B) with the logo (C) in the lower right-hand corner of the covering 

and tightly press on the logo (C).

d)  Remove the transparent protective foil (A).

e)  Remove the template (B).

2.  Mount the covering and the accessories as shown in the illustration.

Summary of Contents for 0549-010















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands