FD 10
0549-990-01---10a_2019.11.indd
7...10
C
C
M5 x 16
D
B
B
B
C
C
D
10 Nm
M6 x 16
A
10 Nm
M6 x 16
A
0549-990/02a
Page 15 of 69
Mounting and operating instructions
4.3
Drive mechanism
1. Mark and drill fixing holes in the lintel/door leaf in accordance with the situation.
Note:
You can use the chassis profile (B) as a drilling template.
Observe the alignment of the chassis profile (B).
Four of the six drive-module fixing screws (C) are located near to the door hinge (D).
2. Use the six fixing screws (A) to mount the chassis profile (B).
Warning:
Tighten all the six fixing screws (A) with a torque of
10 Nm
!
3. Attach the drive module to the chassis profile (B):
a) Provisionally attach the two lower screws (C) – of the four nearer to door hinge (D) – to
chassis profile (B) at a distance, measured from screw-head to chassis, of 7 to 10 mm.
