FD 10
0549-990-01---10a_2019.11.indd
E
5 Nm
C
B
A
90°
C
B
320
353...594
20
19
26
36
22
11
25 Nm
9 Nm
D
D
9 Nm
0549-990/02a
Page 18 of 69
Mounting and operating instructions
2. Close the door leaf.
3
. Separate the rotating arm (C) from the rod arm (B) by loosen the screw (E).
4. Fasten the rod arm (B) by means of the door connection angle (A) onto the door leaf.
5. Position the rotating arm (C) approx. perpendicularly with regard to the door leaf and screw
it down in this position
Tightening moment
25 Nm
.
6. Slightly loosen the screws (D) and fasten the rotating arm (C), by means of the screw (E) to
the rod arm (B)
Tightening moment
5 Nm
.
Attention:
Adjust the rods to the required length. Choose the largest possible distance between both
screws (D).
7. Prestress the rotating arm (C) until the rod arm (B) forms a right angle with the door leaf.
Fasten the rod arm (B) by means of the screws (D)
Tightening moment
9 Nm
.
Attention:
Check the motional sequence of the door leaf: The rods must not touch!
forward to chapter 4.7