![background image](http://html.mh-extra.com/html/sargent/assa-abloy-8800-series/assa-abloy-8800-series_installation-instructions_1199078001.webp)
1
Mark vertical and horizontal reference lines of the door (See Figure 1)
1-800-727-5477 • www.sargentlock.com
A6703H 07/21
Copyright © 2008, 2012, 2021 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express
written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Installation Instructions
8800 & 12-8800 Series
Rim Exit Device for 16, 28, 63, & 66 Functions
Before installation:
1. Install mullion, if used.
2. Fit and hang door.
3. Check the box’s label for the size of the exit device.
Available Stock Lengths:
Length “E”: 32” door, no cut off required. Can be cut to fit doors down to 24” wide.
Length “F”: 36” door, no cut off required. Can be cut to fit doors down to 33” wide.
Length “J”: 42” door, no cut off required. Can be cut to fit doors down to 37” wide.
Length “G”: 48” door, no cut off required. Can be cut to fit doors down to 43” wide.
Surface of the door where exit device is applied, must be flush. Clear away any raised projections to allow exit device to rest on
the flat surface of the door.
L
Product Overview
Figure 1
Vertical & Horizontal Reference
Center chassis
assembly (8828)
Center chassis
assembly (8863)
Cover
(8826,8863)
649
Strike
Rim Cylinder
Center chassis
assembly
(8816,8866)
Cover
(8816,8866)
Collar
Mortise
Cylinder
a
Identify type of installation to determine the location of the vertical C.
End Cap
Mounting Plate
Rail Assembly
"Lock Down Key"
To operate: Depress pushrail; Insert hex key, and turn
counter clockwise.
Attention:
Not furnished with 12- (Fire Rated) Exit Devices.
37-5/8"
41"