GILES GEF-400 Operation & Service Manual Download Page 55

Page: 55 / 115

GEF & GEF-VH Series Fryers

Fryer Operation

5.1.4.2 Selecting a Menu Preset for Cooking

A. Direct Entry Method

- Desired Menu # is

known.

Press the

[MENU]

key

-OR-

Directly enter the

desired Menu #.

Use numeric

keypad to input

desired Menu #

(1 or 2 digits)

B. Scroll Method

- Scroll through list of Menu

Presets. Menu #, Name, Cook Time & Cook

Temp are shown on the

Upper OLED

Display

Press the

[MENU]

key twice (2x)

Use numeric

keypad

[2] & [8]

(up/down) to scroll

through list to a

desired Menu

If actual oil temperature is lower than the temperature setting of the Menu Item selected and the

Selector Switch

is in the [COOK] position,

cooking oil will begin heating. If the Menu Preset temperature happens to be lower than

actual oil temperature, Controller will immediately enter

READY

state and cooking may begin.

Press the

[START]

key to

select Menu

Item

After selecting a Preset, place Selector Switch in the [COOK] position.

Selected Menu Item information is displayed on the Upper OLED Display.

Press the

[START]

key to

select Menu

Item

NOTE:

Basket Lift is inoperable while the Fryer is in the PREHEAT phase. Lift will be re-enabled when setpoint is

reached and Fryer enters READY state.

Before selecting a Menu Preset, be sure the Selector Switch is in the [OFF] position and that

Pot is filled with cooking oil..

Summary of Contents for GEF-400




















































































































Search results

Summary of Contents for GEF-400

Reviews:

Related manuals for GEF-400

Brands by name

Popular brands

GILES GEF-400, Operation & Service Manual

Search results

Summary of Contents for GEF-400

Reviews:

Related manuals for GEF-400

Brands by name

Popular brands