Unit Preparation
EOF 20/20
31
8. Press the Heat Switch to the OFF
position
9. The wet element should quickly dry within 15 seconds.
Proceed to Section 4-4.
If the Heating Element does not dry within 15-30 sec-
onds, refer to the Troubleshooting procedure in Section
7-1.
10
10
EOF-20
4-03. Heating Element test (Continued from previous page)
4-04. Filter Pump Test
1.
Follow steps shown in Section 4-1.
2. Open Cabinet Door.
3. Place the palm of your hand over the Quick
Disconnect
for the Filter Pan Hose.
4. Briefly press the Pump Switch to the PUMP
position then press the Pump Switch to the OFF
position. If suction is felt on the palm, the
pump is operating correctly. Proceed to Section
4.5.
If no suction is felt, refer to the Troubleshooting
procedure in Section 7-2.
3
2
1
1
2
3
The following test will ensure the Filter Pump is operating correctly.
Summary of Contents for EOF-20/20
