GILES EOF-20/20, Operation & Service Manual

Page: 25 / 102

13
EOF 20/20
Overview
3-02. EOF-20 Control Panel
Item Description Function
1 Power Switch
The Power Switch is used to turn power ON or OFF to the
unit.
2 Heat Switch
The Heat Switch is used to turn the power to the elements
ON or OFF. Place the Heat Switch in the OFF position when
programming the controller or shutting down the unit. Place
in the ON position when ready to heat the oil.
3 Controller
The Electronic Controller is used for setting a cooking tem-
perature and cooking times.
4 High-Limit Indicator
The Red High-Limit Indicator Light is illuminated as a result
of power being shut off to the fryer’s heating elements by
the built-in solid-state control circuit as a safeguard against
overheating. Should this light come on during operation,
refer to the Troubleshooting, Section 7, of this manual.
NEVER ATTEMPT TO COOK IF THE HIGH-LIMIT LIGHT IS
ON!
5 Heat Indicator Light
The Orange Heat Indicator Light will be on when the Heat
Switch is in the ON position and the heating elements are
heating the oil. The light will go on and off at various times
as the oil temperature is maintained.
6 Power Indicator Light
The Green Power Light is on whenever the fryer’s Power
Switch is in the ON position.
7 Elevator Switch
The Elevator Switch is used to turn the Elevator power on or
off. If the switch is ON the Elevator will lower when a cook-
ing cycle starts and rise when a cooking cycle ends. If the
switch is OFF the Elevator will not operate.