MDE-4699L Applause™ Media System Installation, Service, and Parts Manual · June 2017
Page G-3
Encryption Level
Security Settings for Site Server
Encryption Level
The Encryption Level setting determines which HTTP and HTTPS protocols can be used to
connect to the Site Server. Change security settings only when requested by the site IT
department. To change the encryption level, select the desired level from the menu, and click
Continue
.
After applying the changes, you will be prompted to reboot the site server. After the site server
reboots, the new encryption level will be in effect.
The following table lists the encryption level settings and the HTTP and HTTPS protocols
used to connect to the site server:
The following table lists the encryption level settings for dispenser types:
Note: If the encryption level is set to TLS mode, “https:” must be used to connect to the site
server’s control panel web interface. When connecting to control panel via “https:”,
your browser will display a warning stating that it cannot verify the security certificate
(or similar warning). This is normal behavior, because the certificate is self signed.
When the message is displayed, select proceed to site anyway (or appropriate option in
your specific browser).
Encryption Level
Protocols Allowed
Plain Text
(HTTP)
SSLv2
SSLv3 TLSv1
TLSv1.1
TLSv1.2
Fallback Mode (default)
Yes
No
Yes
Yes
Yes
Yes
TLS Mode
No
No
No
No
No
Yes
Clear Mode
Yes
No
No
No
No
Yes
Encryption Level
Dispenser Type
Encore 500
With
FlexPay II
CRIND
without
EMV
Support
With
FlexPay II
CRIND with
EMV
Support
With
FlexPay IV
CRIND
Non-EMV
FlexPay II
and
FlexPay IV
Other
Fallback Mode (default)
Yes
Yes
No
No
Yes
Yes
TLS Mode
No
No
Yes
Yes
No
Yes
Clear Mode
Yes
No
No
No
No
Yes
