Te
mplat
e
M
odu
le
, V
e
rs
io
n 1.
2,
11
.0
9.
201
8,
“Do not disturb”
Gigaset GS280 / LUG AU-IE-UK-International en / A31008-N1510-L101-1-7619 / operating.fm / 2/22/19
32
Using a fingerprint
If an action can be authorised with a fingerprint, the
icon or alternative pattern is displayed
if a display lock with fingerprint is set up.
¤
Tap the fingerprint sensor with a finger which has been scanned Repeat the process as
required
The alternative method is enabled automatically if the fingerprint is not recognised after several
attempts.
“Do not disturb”
The “Do not disturb” function mutes the device. It does not ring or vibrate. It prevents for
example the phone ringing at night and during meetings, and all interruptions apart from a
wake-up call. You can choose between three modes:
Total silence
(total silence)
No ringtones, no vibrating, no audible signalling of wake-up calls or notifications, no sound
for music, videos, games or other media.
Alarms only
Signalising of wake-up calls, also the sound for music, videos, games or other media is
turned on.
Priority only
Signalising of important notifications, also the sound for music, videos, games or other
media is turned on.
Important notifications are messages from apps with setting
Treat as priority
( page 24).
Further events can be defined as important interruptions, such as calls from certain people.
Enabling “Do not disturb”
¤
From the Status bar, swipe down . . . The quick settings are displayed Tap
Do not
disturb
¤
Tap
Alarms only
Select the required mode (
Total silence
/
Alarms only
/
Priority only
)
Specify how long the setting is to apply (
Until you turn off Do Not Disturb
or use +/– to
choose a time period in hours)
Done
. . . The following icon is displayed in the Status bar:
Total silence
:
/
Alarms only
,
Priority only
:
“Do not disturb” can also be enabled automatically in line with defined rules.
Defining the rules: page 52
You can also set the
Alarms only
mode as follows:
¤
With the display enabled, keep the Quiet button on the right of the device pressed
until the volume has reached the lowest setting Press the Quiet button again
. . . The
Alarms only
mode is enabled
