The QSFP28 and CXP ports on GigaVUE TA Series-TA100-CXP can be used as network,
tool, or hybrid ports. They cannot be used as stack ports. Subports created from 4x10G
mode can function as network, tool, or hybrid ports. They cannot be used as stack ports.
The GigaVUE TA Series-TA100-CXP node must be running software version 5.0 or higher.
Figure 5
The GigaVUE TA Series-TA100-CXP Chassis Front View
Port
Description
Mgmt
Use the Mgmt port for remote configuration of the GigaVUE TA Series-TA100-CXP
over a 10/100/1000 Ethernet network.
Console
Use the console port for local configuration of the GigaVUE TA Series-TA100-CXP
over a serial connection.
Table 6: GigaVUE TA Series-TA100-CXP Ports
Contents
33
GigaVUE TA Series Hardware Installation Guide