Software Upgrade using USB Drive
If a GigaVUE TA Series-TA100-CXP does not have network access, there is a USB port on
the front of the chassis.
A software image can be downloaded to a USB drive, the drive can be inserted into the
USB port on the GigaVUE TA Series-TA100-CXP, and the software image can be installed
from the drive. Use the format, fat32, for the USB drive.
The following are ways to download a software image to a USB drive:
• Insert the drive into your computer or laptop and drag and drop the software
image onto the drive.
• Insert the drive into a GigaVUE TA Series-TA100-CXP with network access and use
the image fetch CLI command with the usb parameter.
Air Flow Direction
The air flow direction is from the front of the GigaVUE TA Series-TA100-CXP chassis to
the rear. The rear-mounted fans pull air from the front to the back of the chassis. Install
the chassis so the intake air at the front of the chassis is cold.
AC and DC-Powered GigaVUE TA Series-TA100-CXP Models
Gigamon provides both AC and DC-powered versions of the GigaVUE TA Series-TA100-
CXP.
Battery Caution
A disposable, non-rechargeable, Real Time Clock (RTC) Lithium metal coin cell battery is
in the GigaVUE TA Series-TA100-CXP. Note the following:
• There is a risk of fire if the battery is replaced with an incorrect type.
• Use only CR-2032L type Lithium metal coin cell battery and replace with the same.
GigaVUE TA Series-TA200 Chassis
This section describes the physical layout of the GigaVUE TA Series-TA200 chassis,
including a description of all ports and connectors. The GigaVUE TA Series-TA200 chassis
consists of a 2RU, rack-mountable, 19”-wide chassis with management, network, and
tool ports at the front and power connections and fans at the rear.
TA Series-TA200 Chassis Front View
shows the ports at the front of the GigaVUE TA
Series-TA200 chassis. Refer to
Table 8: GigaVUE TA Series-TA200 Ports
for a description
Contents
39
GigaVUE TA Series Hardware Installation Guide