HW Getting Started Guide
MPC8349EA MDS
Processor Board
Nov 2006: Rev. A
MPC8349EA MDS Processor Board HW Getting Started Guide, Rev. A
Freescale Semiconductor
Page 1 of 8
Contents
Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Required Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Definitions, AcroRev. And Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Step 1: Check HW kit contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Step 2: Connect plastic spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 3: Check Switches and Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Step 4: Assemble and connect the power supply kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 5: Perform initial board power up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 6: Connect the JTAG connectivity unit to the board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Step 7: Attach remaining cables to the board according to your development needs. . . . . . . . . . . . . . . . . . . . . . 7
About This Document
This document shows how to connect the MPC8349EA MDS processor board and verify its basic operation, in a step by step
format. Settings for switches and jumpers are shown, as well as instructions for connecting peripheral devices. In addition,
instructions for connecting the MPC8349EA MDS processor board to an Integrated Development Environment (IDE), such as
Freescale’s
CodeWarrior
®
are included, but instructions for working with the IDE are beyond the scope of this document. This
version of the board has a faster DDR2 (400MHz), and a flash memory of 32MB.
Required Reading
It is assumed that the reader is familiar with the MPC8349EA chip, and the contents of the
MPC8349EA Reference Manual
.
Definitions, AcroRev. And Abbreviations
BCSR
board control and status register
LED
light emitting diode
BMS
boot memory space
PCI
peripheral component interconnect
CFG_RS
bit in RCW register
PCI_SYNC_OUT
chip pin
CLKDIV
clock division
PIB
platform I/O board
CLKIN
clock input
PLL
phase lock loop
COP
debug port in PowerPC
RCW
reset configuration words
DDR
double data rate DRAM
ROM
read-only memory
DIP
dual in-line package
SHMOO
sweep test (of frequency and core voltage)
I2C
Philips serial port
TLE
bit in RCW register
JTAG
IEEE standard 1149.1
TSEC
triple speed ethernet controller
