• Use the hostname command to change the system’s hostname.
• Use the interface eth0 command to reconfigure or fine-tune Mgmt port settings,
including basic IP settings (DHCP or static address and subnet mask) and physical
parameters (duplex, MTU, and speed).
• Use the ip command to change the default gateway, DNS server, and domain
name.
• You can also use the username admin password <password> command to change
the admin user’s password. Refer to
Changing the admin Account Password
• Use the chassis box-id command to change the system’s box-id.
Refer to
for a quick summary of the available GigaVUE TA
Series commands for TA
Series nodes.
Port Licensing
GigaVUE TA Series-TA10, GigaVUE TA Series-TA40, GigaVUE TA Series-100-CXP and
GigaVUE-TA25 have all ports enabled.
Additional ports are available through licenses for the following GigaVUE TA Series
products:
•
•
•
•
Contact your Sales representative for port licenses. Refer to
GigaVUE TA Series-TA10A
The GigaVUE TA Series-TA10 has all forty-eight (48) 1Gb/10Gb ports and four (4) 40Gb
ports enabled. It has serial numbers Dxxxx and does not require a port license.
A twenty-four (24) port GigaVUE TA Series-TA10 version, called the GigaVUE TA Series-
TA10, is available with only the first 24 1Gb/10Gb ports enabled. The GigaVUE TA Series-
TA10A has serial numbers Gxxxx and product code 132-00D1. A license is needed to
expand a GigaVUE TA Series-TA10A to include all 48 1Gb/10Gb ports as well as the four
(4) 40Gb ports.
Contents
69
GigaVUE TA Series Hardware Installation Guide
