Enable IPv6?
You can enable the use of IPv6 for the
management port. IPv6 is used in addition to IPv4
if you enable this option. If you enable the IPv6
you have the option of enabling IPv6
autoconfiguration or specifying a static address.
Security Settings
Enable the following security settings:
• secure cryptography mode
• secure passwords mode
• minimum password length
Refer to the GigaVUE-OS-CLI Reference Guide
for information on security.
Admin Password
The password for the admin account must be
changed to a non-default password.
Cluster Enable?
Enable cluster support if this node will be a part of
a cluster of connected GigaVUE TA Series nodes. If
you enable cluster support, the jump-start script
prompts you to supply the Cluster ID, Cluster
Name, and Cluster Mgmt Virtual IP Address. You
can join an existing cluster by supplying values
that match existing settings.
If clustering is enabled, you will not be prompted
for a box ID in the next step.
Refer to the
GigaVUE-OS-CLI Reference Guide for
information on setting up a cluster.
N
OTE
:
Connecting a Traffic Aggregator to a
cluster requires a license.
Box ID for the Node
Supply a numerical box ID for the node. This box
ID is used to identify network/tool ports in the
node – the format is box ID/ slot ID/port ID.
You will be prompted for a box ID only if
clustering was not enabled in the previous step.
5. Review your settings. You can change a setting by specifying its listed line number
and re-entering the setting.
6. When you are satisfied with your settings, exit the script as prompted. The system
automatically saves your settings.
7. Restart the system with the reload command.
Need to Change Any Settings?
If you need to change any of the settings you made in the jump-start script, you can
either run the script again or change individual settings using the following commands in
the Configure command mode:
Contents
68
GigaVUE TA Series Hardware Installation Guide