Gigamon GigaVUE H TA100-CXP Hardware Installation Manual Download

Page: 29 / 115

• GREEN indicates the link is operationally up

• Off indicates the link is operationally down

• Blinking GREEN indicates the port is operationally up and there is traffic flowing

through the port

The other three LEDs operate when ports are in breakout mode as follows:

• Off indicates the port is in non-breakout mode

• GREEN indicates the link is operationally up

• AMBER indicates the port is administratively disabled

Global Fan LED

The global fan LED on the front of the chassis is as follows:

• GREEN indicates all fans are operating normally

• AMBER indicates one or more fans have failed

Individual Fan LEDs

The individual fan LEDs on the rear of the chassis are as follows:

• GREEN indicates the fan is operating normally

• AMBER indicates the fan has failed

Individual Power LEDs

The individual power LEDs on the rear of the chassis are as follows:

• GREEN indicates the PSU is operating normally

• Off indicates the PSU is not operational

GigaVUE TA Series-TA100 Notes and Rules

Keep in mind the following notes and rules when using the GigaVUE TA Series-TA100:

GigaVUE TA Series-TA100 Notes

Transceivers

For details about the supported transceivers and cable type, refer to the
“GigaVUE-OS Compatibility and Interoperability Matrix”.

Contents

GigaVUE TA Series Hardware Installation Guide

Summary of Contents for GigaVUE H TA100-CXP




















































































































Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands

Gigamon GigaVUE H TA100-CXP, Hardware Installation Manual

Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands