Gigamon GigaVUE H TA100-CXP Hardware Installation Manual Download

Page: 20 / 115

System LED

The system LED on the front of the chassis is as follows:

• Solid GREEN indicates normal operation

• Blinking GREEN indicates the node is booting.

• Solid AMBER indicates system failure.

• Off indicates no power

Fan LED

The fan LED on the front of the chassis is as follows:

• Solid GREEN indicates all fans are operating normally.

• Solid AMBER indicates fan has failed.

The fan LED

at the rear of the chassis is as follows:

• Solid GREEN indicates fan is operating normal

PSU LEDs

The individual power LEDs on the rear of the chassis are as follows:

• GREEN indicates the PSU is operating normally and is receiving good AC input.

• Solid AMBER

indicates the PSU is not operational and is not receiving any AC input.

GigaVUE-TA25 Rules and Notes

Keep in mind the following notes and rules when using the GigaVUE-TA25:

GigaVUE-TA25 Rules and Notes

Transceivers

All Gigamon labeled 1Gb, 10Gb, 25Gb, 40Gb and 100Gb optics are supported.
For details about the supported transceiver, cable type, and connectivity specifications,
refer to “GigaVUE-OS Compatibility and Interoperability Matrix”.

Network,
Tool, Hybrid,
or Stack Port

The GigaVUE-TA25 ports can be used as network, tool, hybrid, circuit or stack-link ports.
The 4x10Gb and 4x25Gb ports also support all port types.

OTE

: On GigaVUE-TA25 all port types are supported with break-out subports. Only C1,

Contents

GigaVUE TA Series Hardware Installation Guide

Summary of Contents for GigaVUE H TA100-CXP




















































































































Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands

Gigamon GigaVUE H TA100-CXP, Hardware Installation Manual

Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands