Gigamon GigaVUE H TA100-CXP Hardware Installation Manual Download

Page: 36 / 115

SFP Power (7-8) (dBm):

-40.00 -40.00

SFP Power (9-10)(dBm):

-40.00 -40.00

SFP Temperature (C):

23.88

The output of the following CLI command displays the fan speed in RPM (the normal
operational speed is approximately 12000

RPM; the maximum speed is approximately

19000

RPM):

(config) show environment

...

Fan tray 1 (FAN-TAC00):

1st fan :

12136 RPM

2nd fan :

12288 RPM

3rd fan :

12136 RPM

4th fan :

11988 RPM

...

Power LEDs

The power LEDs on the front of the chassis (PWR1 and PWR2) are as follows:

• Solid GREEN indicates that the power supply unit (PSU) has power and is operating

normally.

• Solid AMBER indicates a Power-On Self-Test (POST) is in progress.

• Blinking AMBER indicates that the PSU is present but without power.

• Off indicates that the PSU is not inserted in the chassis.

System LED

The system LED on the front of the chassis is as follows:

• Solid GREEN indicates normal operation

• Blinking GREEN indicates the node is booting or the system is in diagnostic mode

• Solid RED indicates a critical alarm

• Blinking RED indicates a non-critical alarm

• Off indicates no power

QSFP28 Port Status LEDs

For each QSFP28 port, there are four (4) port status LEDs on the front of the chassis. At
40Gb and 100Gb speeds, only the first LED operates as follows:

• AMBER indicates the port is administratively disabled

Contents

GigaVUE TA Series Hardware Installation Guide

Summary of Contents for GigaVUE H TA100-CXP




















































































































Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands

Gigamon GigaVUE H TA100-CXP, Hardware Installation Manual

Search results

Summary of Contents for GigaVUE H TA100-CXP

Reviews:

Related manuals for GigaVUE H TA100-CXP

Brands by name

Popular brands