• The maximum number of 10G subports on a GigaVUE-TA200 is 128 (32 x 4).
• The maximum number of 10G subports on a GigaVUE-TA40 is 96 (24 x 4).
• The maximum number of 10G subports on GigaVUE-TA25 is 8 ( 2 x 4)
The 100Gb QSFP28 ports (1/1/c1 to 1/1/c10 and 1/1/c23 to 1/1/c32) on the GigaVUE-
TA200 and GigaVUE-TA25 can be broken out into four 25Gb ports, called subports. In
GigaVUE-TA25 only the ports c1 and c5 support 4 x25G breakout mode.
The subports will all have the same speed (25Gb). Subports will have x1 to x4 appended
to their port ID, for example, when port 1/1/c2 on GigaVUE-TA200 is configured to
4x25G mode, the subports will be: 1/1/c2x1, 1/1/c2x2, 1/1/c2x3, and 1/1/c2x4. The
maximum number of 25Gb subports on a GigaVUE-TA200 is 128 (32 x 4).
In GigaVUE-TA25 the maximum number of 25Gb subports is 8 ( 2x 4)
In 4x25G mode, the subports can function as network, tool, or hybrid ports, as well as
GigaStream port members. They cannot function as stack ports.
There are rules for configuring parent ports and subports. For more information, refer to
the port command in the reference section of the GigaVUE-OS-CLI Reference Guide.
Once the port breakout mode has been configured, refer to
.
For further information refer to GigaVUE-OS Compatibility and Interoperability Matrix.
Breakout Panels
Breakout panels let you connect ports on a GigaVUE TA Series node to a tool or network
port or TAP for port breakout or aggregation.
The following breakout panels are available:
• PNL-M341
• PNL-M343
Refer to
G-TAP M
Series Hardware Guide for details.
Getting Unpacked, Racked,
Installed and Connected
shows the steps required to get a GigaVUE TA Series Traffic
Aggregator mounted and running:
V
Contents
51
GigaVUE TA Series Hardware Installation Guide
