Gewiss JOINON I-CON PREMIUM GWJ3201A, User And Installation Manual

Page: 75 / 324

75
To enable a recharging session:
# Action to be carried out RGB LED status
1 Make sure there are no errors on the charging station Fixed green
2
Swipe an RFID card across the scanner, close to the graphic
symbol
Fixed green
3
If the card is recognised (i.e. it's in the local list), the recharg-
ing station is activated to begin the charging session, and
waits for the vehicle to be connected.
Flashing green
4
Once the vehicle has been connected, the station checks
that everything is OK for the charging session
Flashing green
5
If there are no problems, the charging station will block the
plug in the socket-outlet both electrically and mechanically
(not for versions with a cable). The recharging session begins
Flashing blue
6 The vehicle requests energy from the recharging station Fixed blue
7 Recharging session in progress Fixed blue or flashing blue
8
To end the charging session, take the same RFID card used
to launch the session and swipe it across the scanner again.
The station ends the charging session by releasing the plug
from the Type 2 socket-outlet (not for versions with a cable)
From fixed blue or flashing blue to flash-
ing green
9
Take the plug out of the socket-outlet on the charging station
side
From flashing green to fixed green
10 If the station detects no errors, it will return to standby Fixed green
12.3 CLOUD OCPP OPERATING MODE
In this mode, the charging station is connected to a control platform via the OCPP protocol. The OCPP protocol
allows the station to connect to any platform which uses that protocol. To take advantage of this mode, a specific
parameter configuration is needed in order to create correct station-platform communication. The use of con-
nected solutions allows access to a series of advanced options that give both the end user and the owner better
access to the service. The end user can use the JOINON app or a similar expedient to find the nearest recharging
station and access the service by following the instructions given. The station owner can monitor the status of the
station and the consumption level from remote and in real time.