GESTRA SPECTORcontrol User Manual Download

Page: 12 / 84

Commissioning

continued

System settings

The system adjustments for commissioning are stored on the CompactFlash™ card or in the Internal

Storage by GESTRA. They ensure a trouble-free commissioning procedure.
Grey entry fields or symbols are password protected.
In every menu that requires a password you can enter your password. The release of password-protect-

ed menus is time limited (default time of 1 hour). After this period of time the release is automatically

terminated and the password must be entered again.
The equipment features the following default settings:

Time:

Real-time date and clock (battery-backed)

Contrast:

Contrast = 50 %

Backlight = 100 %

Language:

English

IP address settings: 192.168.0.99

Passwords:

Level 1 for operating personnel: #####

Level 2 for engineering personnel: #####

Level 3 for commissioning personnel: GESTRA (factory setting)

Note

After commissioning we recommend that you use a new password.

Make sure that the same password is not used twice.

Max. length of password: 8 characters.

All brand names and product names are trademarks or registered trademarks of the respective manufacturer.

Summary of Contents for SPECTORcontrol





















































































Search results

Summary of Contents for SPECTORcontrol

Reviews:

Related manuals for SPECTORcontrol

Brands by name

Popular brands

GESTRA SPECTORcontrol, User Manual

Search results

Summary of Contents for SPECTORcontrol

Reviews:

Related manuals for SPECTORcontrol

Brands by name

Popular brands