36
1. Select a green input field in the menu for the
CAN outputs.
2. If a CAN output is already parametrised, a
relevant status screen such as this is shown.
3. The setup menu is password protected.
Press
and enter your password.
4. To get to the following
setup menu, press the button
.
CAN 1...10 output URZ 40a
Note
Malfunctions in the actuator are shown in red plain text on the screen.
To adjust the inputs/outputs, press the button
in the menu
Overview
.
1. The names of the current CAN outputs are
listed in the green input fields. Active inputs
are indicated on the left by a yellow number.
A node ID conflict is indicated by a mark at
the left side of the ID setting. To the right of
this, the currently measured value, the asso-
ciated unit and the graphical representation
are shown. Current alarms are indicated for
each individual input by a mark at the left
side of the graphical representation.
2. To reconfigure an output, select the green
input field. A pulldown menu appears with
the possible CAN participants.
If an output is already configured, the name
is shown in the input field.
Select the input field to call up the corresponding menu directly.
Menus of Inputs/Outputs
continued
CAN 1...10 output URZ 40a overview
Summary of Contents for SPECTORcontrol
Page 82: ...82 For your notes ...
Page 83: ...83 For your notes ...
