65
Note
The activation times and the frequency of switching are accumulated for the selected
digital inputs.
Maintenance
1. Press
in the menu
Boiler
.
2. The green input fields show the names of the
signals to be monitored. A yellow lamp on the
left side signals On and a grey lamp signals
Off. The current run time is highlighted in
grey (hh:min) and the current number of
switch processes for each signal is shown.
Infringements of the limit values are immedi-
ately shown by red spots.
3. Select the input field to go to the setup menu.
Boiler Menus
continued
Maintenance 1..5 setup
1. Select the green input field for the desired signal in the maintenance menu.
2. The menu
Maintenance 1...5 setup
is pass-
word protected.
Press
and enter your password.
3. Select the green input field to enter or
change the signal assignment. All digital
inputs are shown as selectable.
4. To enter or change the limits of the run time
or switching frequency, select the input field
that you wish to change.
5. To delete the current value, select the button
that follows the value to be deleted.
Summary of Contents for SPECTORcontrol
Page 82: ...82 For your notes ...
Page 83: ...83 For your notes ...
