Georator T3UPS-33-700K, Instruction Manual

Page: 61 / 98

5-13
5.13. Menu 12 – Other Setting Menu
＜
O T H E R S E T T I N G
＞
→
T I T L E :
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
M O D E L : X X X X X X S
／
N : X X X X X X X X X X I D : X X E X I T
This menu is displayed when the item PARAMETER SET is selected from MENU 1,
the SELECT MENU and the correct password is entered. Note that this is a
different password from the password used to enter PARAMETER SETTING menu,
and should only be available to maintenance personnel. This menu can change the
TITLE, MODEL, S/N, ID etc. Once this menu is opened, the current value in the
EEPROM will be shown. The cursor (
→
) can be moved upward by the UP (
↑
) key,
and can be moved downward by the DOWN (
↓
) key to the item one wants to
change. The selection is confirmed by pressing the ENTER (
←┘
) key.
See the figure above. Once either one of the items is selected, the values of that
item are cleared, now waiting for new values to be entered. The values to be entered
are either alpha or numeric, except the ID for which only numbers are allowed. The
values that can be entered are restricted to certain values according to which item is
being set (the values are listed below).
- TITLE :
□
, A – Z, 0 - 9
- MODEL :
□
, A – Z, 0 - 9
- S/N :
□
, A – Z, 0 - 9
- ID : 0 - 31
** where
□
means blank
If “EXIT” is selected (blinking instead of pointed by cursor), the screen will go
back to the MENU 5, the PARAMETER SETTING menu.