Georator T3UPS-33-700K Instruction Manual Download Page 30

Page: 30 / 98

M. Up key:

This is a LCD control key. It is for moving the cursor one item upward

when items are being selected or for changing the number/character forward when
data or parameter of the UPS is being set.

N. Down key:

This is a LCD control key. It is for moving the cursor one item

downward when items are being selected or for changing the number/ character
backward when data or parameter of the UPS is being set.

O. Enter key:

This is a LCD control key. It is for changing backward to the previous

page, and also for confirming the number/character /item is selected.

P. Inverter on switch:

This is an inverter control switch. When this key is pushed with

the control key simultaneously, the inverter will be switched on.

Q. Inverter control switch:

This is an inverter control switch. When this key is

pushed with the inverter on key simultaneously, the inverter will be switched on.
Similarly, when this key is pushed with the inverter off key simultaneously, the
inverter will be switched off. Thus, this key is a guard for mistaken key strokes.

R. Inverter off switch:

This is an inverter control switch. When this key is pushed

with the control key simultaneously, the inverter will be switched off.

1-25

Summary of Contents for T3UPS-33-700K



































































































Search results

Summary of Contents for T3UPS-33-700K

Reviews:

Related manuals for T3UPS-33-700K

Brands by name

Popular brands

Georator T3UPS-33-700K, Instruction Manual

Search results

Summary of Contents for T3UPS-33-700K

Reviews:

Related manuals for T3UPS-33-700K

Brands by name

Popular brands