USER'S MANUAL
45
|
P a g e
ITEM
3
Control ID
This is the section where you input the ID for the PTZ camera. It is very important to have different
ID configured to the PTZ cameras.
ITEM
4
Baud Rate
This drop down list shows all the possible baud rate configuration option that could be chosen
ITEM
5
Data Bits
In this dropdown list bar you may select from 5 to 8 bits. This the length of the bits used to
communicate with PTZ and the DVR unit. Consult your PTZ manual to see what bit length your
PTZ uses.
ITEM
6
Stop Bits
In the dropdown list bar you may choose 1 or 2 for stop bit parameters. They are last bit being
used by your PTZ.
ITEM
7
Parity
It is check sum bit parameter counted in either 0 or 1.
ITEM
8
PTZ Speed
ITEM
9
Copy Setting
Upon selecting the Copy Setting button, the Copy Setting popup will appear. This popup will
enable you to select the PTZ camera configured, and enables you to copy Items 2 and Items 4~6
mentioned above by giving you the option to check the check box. Select the cameras to copy by
using the To section and check the camera numbers.
Figure
57
Copy
Setting
popup
for
PTZ
configuration
ITEM
10
Test PTZ (Pan and Tilt)
You may use the directional button here to test if your PTZ connection was successful. Upon
successful configuration your PTZ should pan and tilt.
- Pan Speed: 1 ~ 7
- Tilt Speed: 1 ~ 7
- Zoom Speed: 1 ~ 7
To save the setting value, click the “OK” button.
Summary of Contents for H.264 Digital Video Recorder
Page 1: ......
Page 77: ...USER S MANUAL 77 P a g e...
