USER'S MANUAL
32
|
P a g e
MOUSE OPERATION EXAMPLE
To easily navigate with USB mouse, you may right click on the live view screen and hover
to the “Audio” Sub Menu item from the Monitoring popup then left mouse button click to
shown List Items for Audio Sub Menu. Left Mouse button click on Audio 1 ~ 4 to enable
audio or Left Mouse button click on Off to disable audio.
After successful configuration of the audio in order for you to hear certain audio channel you must
enable the audio from the Playback Popup menu. Speaker device must be connected and turned on
from the DVR unit.
Figure
33
Enabling
Audio
from
Playback
Popup
Menu
MOUSE OPERATION EXAMPLE
To easily navigate with USB mouse, you may right click on the Playback screen and
hover to the “Audio” Sub Menu item from the Monitoring popup then left mouse button
click to shown List Items for Audio Sub Menu. Left Mouse button click on Audio 1 ~ 4 to
enable audio or Left Mouse button click on Off to disable audio.
IMPORT / EXPORT / RESET CONFIGURATION
When working with multiple DVR units, it is often desired, that all DVR units to share certain
configuration parameters. Configuration files may be imported, exported and applied with factory default
operation applicable in six different categories. These categories are identical to first six icons seen on
Main Setup page as well. They are System, Display, Camera, Record, Device, and Network. In this
chapter we will discuss how to import and export the configuration setting parameters. In later portion of
this chapter, this manual will also show you how to perform factory default procedures as well.
To import and export the DVR units system configuration file you must navigate to window titled
Configuration. You may access this window by using drop down list button located on upper left corner
from any window or in Main system menu click on to System Menu button than select Configuration.
CHAPTER 8. USER SETTING
4. Listening to Audio in Search View
CHAPTER 9. IMPORT / EXPORT / RESET CONFIGURATION
1. Import and Export Configuration
CHAPTER
9
To enable audio, from the Playback mode click on
[Menu] button on frontal key pad or the remote
controller. Navigate using directional key buttons to
go to “Audio” sub menu item and click enter,
navigate using directional key pad to select Audio
1~4 or Off.
Summary of Contents for H.264 Digital Video Recorder
Page 1: ......
Page 77: ...USER S MANUAL 77 P a g e...
