DGD values to the ones entered. Click “Start” to start the scan. During the scan, the
current DGD value (in ps) is displayed in the box at the right of the screen.
SCAN PMD:
The PMD-1000 scans all DGD/SOPMD pairs in order of their index number (see lookup
table for corresponding values). Set the desired dwell time per point (Scan Interval) and
number of times to run the scan (Cycle #) and then click “Start” to start the scan. During
the scan, the current PMD index number and the corresponding DGD and SOPMD values
are displayed.
Document #: GP-UM-PMD-1000-21
Page 59 of 122
