BCT_T Rev.00 05-2015
pag. 92
3.
Press and release the ON/STAND-BY (1) key.
If the duration of the power cut has been such to cause the clock error (“
rtc
” code), the real day and time will have
to be reset;
see paragraph 10.1 “Setting the real day and time”.
7.4.3
– SWITCHING THE DEVICE ON/OFF
Switching the device on/off
Operate as follows:
1.
Make sure that the keyboard is not locked and that no procedure is in progress.
2.
Press and release the ON/STAND-BY key.
7.4.4
– THE DISPLAY
The display
The display is off during the "off" status and during the "stand-by" status.
During the “on” status, the device will display the real day and time and the temperature of the cabinet.
