BCT_T Rev.00 05-2015
pag. 121
7.
Press and release the
key (1) to select “
UPLOAD PROGRAMS
”, then press and release the
key (2): it will
automatically be started the reading (from the peripheral) of the text
document by name “ricette.txt” (containing
information about the programs); the reading procedure can take some minutes.
8.
To the end of the download remove the USB peripheral from the USB port.
7.7.13
– DOWNLOAD OF THE INFORMATION RELATIVE TO THE HACCP ALARMS
Download of the information relative to the HACCP alarms
To make the download of the information relative to the HACCP alarms operate as follows:
1.
Make sure the device is in the “stand-by” status.
2.
Insert an USB peripheral in the USB serial port.
3.
Press and release the
key (1), the
key (2) or the
key (3) to set the day and the time from which the
information must begin, then press and release the START / STOP key (4): it will automatically be started the
writing (into the peripheral) of a CSV (Comma Separated Values) document by name (for example)
“log247n00001.csv” (containing information relative to the HACCP alarms); the writing procedure can take some
minutes.
The name of the CSV document is made (with reference to the example) as follows:
-
“log”: fix field
-
“247”: value of paramater LA (device address)
-
“n”: fix field
-
“00001”: progressive number of downloads of the information relative to the HACCP alarms.
