BCT_T Rev.00 05-2015
pag. 82
3.
– SAFETY
3.1
– GENERAL WARNINGS
IMPORTANT: before using the appliance read this manual carefully and follow the technical operating
instructions and indications to the letter. The operator must know the position and function of all the
control devices and the characteristics of the blast chiller.
The blast chiller complies with current safety regulations, but improper use may cause damage to
persons and things.
At the time of installation all operatives must be suitably trained in accident hazards, operator safety
devices, general accident prevention regulations described in international directives and the current law
in the countries where the appliance is used. Start-up and use of the appliance must be exclusively in
the hands of trained personnel. The behaviour of operators must in any case scrupulously observe
accident prevention regulations in the country where the appliance is used.
Do not remove or deface the plates fitted to the appliance by the manufacturer.
The blast chiller must not be used if the control panel or any other part is damaged.
Do not obstruct the front and/or rear air vents on the appliance; do not place food to be processed up
against the ventilation grilles or air ducts, or directly on the bottom of the chamber.
Promptly report any anomalies in operation.
Use only accessories recommended by the manufacturer.
Do not expose the appliance to rain or sprays of water.
Routine and extraordinary maintenance that require the electrical box to be opened or even partial
dismantling of the blast chiller must be carried out only after the appliance has been disconnected.
The manufacturer has no responsibility in the following cases:
the maintenance plan is not carried out;
unauthorized alterations and/or operations:
spare parts used are not original;
failure to observe even part of the contents of this manual;
improper use of the appliance.
Any tampering with or unauthorized replacement of one or more appliance parts or components and use of
accessories and consumables different from the original ones can constitute a hazard and relieve the
manufacturer of any civil or penal responsibility.
If in doubt about operation of the appliance, refrain from using it and contact the manufacturer.
