manualshive.com logo in svg

GEM GSM-19, Instruction Manual, Page: 97 / 149

Share
Download
GEM GSM-19 Instruction Manual Download Page 97

96 

GSM19 Series Magnetometers - Version 7

 

 
 

 

GEM Systems, Inc. Advanced Magnetometers 

For more technical information, visit www.gemsys.ca 

If you select 

D-station-interpolation

, station numbers are linearly interpolated as follows: 

 

0075N 001937.0E 

  060326.34 

0075N 001937.3E 

  060326.72 

0075N 001937.5E 

  060326.92 

 

Column 1:  Line number and direction 

Column 2:  Interpolated Station number and direction 

Column 3:  Uncorrected magnetic field (nT) 

NOTES: 

The station number always has an extra digit added to the end for the 
interpolation. If you are planning to use station interpolation for walk files, keep 
in mind the number of readings and the distance between pickets by managing the 
cycling time and the station increment. If you have too many readings and small 
station increments, some interpolated stations have repeated values. 

B.5 GRADIOMETER OPTION 

Data obtained with the gradiometer option is sent as follows. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

corrected 

time   

 

line   

station 

 

field nT 

grad nT/m   

  field nT 

111403.0 

 00600N 

0000100E 

 57241.40 

-001.24 

 057228.30 

111421.0 

 00600N 

0000125E 

 57241.37 

-001.27 

 057228.28 

 

Column 1:  Time, as hhmmss.s 

Column 2:  Line number and direction 

Column 3:  Station number and direction 

Column 4:  Unreduced magnetic field 

Column 5:  Magnetic field gradient (nT/m) and sign 

Column 6:  Reduced magnetic field (nT)  

Summary of Contents for GSM-19






















































































































































Reviews:

No comments