GEM GSM-19 Instruction Manual Download Page 141

Page: 141 / 149

140

GSM19 Series Magnetometers - Version 7

GEM Systems, Inc. Advanced Magnetometers

For more technical information, visit www.gemsys.ca

From the survey menu, select cycling rate, tuning, time and other parameters in the normal way.

Connect the sensor(s) and, if required, the GPS antenna.

Press

A-start

to proceed.

NOTE:

If tune initialize is set to YES, it is activated at this point. Make sure the sensors
are connected to the unit. Otherwise, tune initialization fails and this affects all
the scheduled base surveys.

Programmable bases can be operated in three different modes:

•

Immediate

•

Daily

•

Programmable

The screen for the base mode used in the last survey is displayed. Press

E-new-mode

to change the

base mode

SCREEN G3

base start
A-immediate
B-daily
C-programmable D-RS-232

Summary of Contents for GSM-19






















































































































































Search results

Summary of Contents for GSM-19

Reviews:

GEM GSM-19, Instruction Manual, Page: 141 / 149

Search results

Summary of Contents for GSM-19

Reviews: