GEM GSM-19 Instruction Manual Download Page 28

Page: 28 / 149

GSM19 Series Magnetometers - Version 7

GEM Systems, Inc. Advanced Magnetometers

For more technical information, visit www.gemsys.ca

5.3 SURVEY MENU

The Survey Menu is the main menu you use for acquiring data. To access the

Survey Menu,

make

sure you are in the

Main Menu

and

press

The active option on the survey menu is the one highlighted with reverse video. Pressing

moves

the highlighted marker backward, and

moves it forward. Once the desired option is highlighted,

press

C-change

to change its settings.

SCREEN 3

survey mode

position time file

cycle time tuning AC filter
display mode text ID

connect sensor now
029127 readings left
mobile

A-start C-change

←

→

In the

Survey Menu

, you can press the following to initiate the actions shown on the right:

move forward or

move backwards through the parameters

change settings of the highlighted parameter

start the survey at any time

Summary of Contents for GSM-19






















































































































































Search results

Summary of Contents for GSM-19

Reviews:

GEM GSM-19, Instruction Manual, Page: 28 / 149

Search results

Summary of Contents for GSM-19

Reviews: