manualshive.com logo in svg

GEM GSM-19, Instruction Manual, Page: 87 / 149

Share
Download
GEM GSM-19 Instruction Manual Download Page 87

86 

GSM19 Series Magnetometers - Version 7

 

 
 

 

GEM Systems, Inc. Advanced Magnetometers 

For more technical information, visit www.gemsys.ca 

10. UPGRADING INTERNAL SOFTWARE (FIRMWARE) 

One of the new features in v7.0 is the ability to upgrade your magnetometer's internal software (i.e. 
firmware) from a PC using the 6-pin connector for the RS-232 port and the file transfer cables.  

10.1 USING THE GEMLINKW UPGRADE UTILITY 

The Upgrade utility of GEMLinkW provides all the functionality required to upload the new 
software to the unit and guides you to the process with step by step instructions. For your reference, 
the screens below illustrate the messages that the unit displays during the software upgrade process. 

NOTES: 

To avoid hardware/software incompatibility, the source software files are 
released as required and normally named as the serial number of the unit with 
extension '.bin'. 

If you need to upgrade or want to check whether new functionality is available for 
your system through upgrades, please contact GEM Systems at 

[email protected]

 and include “Upgrade” in the title of your message. 

For upgrades, we provide  a file containing the source code and GEMLinkW (or 
other upgrade package provided by GEM Systems). 

10.2 ACCESSING THE UPGRADE MODE 

To access the upgrade mode, the unit must be in the 

test menu

. When the transmission begins, the 

unit displays the following: 

 

SCREEN 90

 

 

software  upgrade  in  progress

 

please  do  not  touch  keyboard

 

receiving  524288  bytes

                                               

 
 
                                                                                                         
 

 

Later, more messages is added to this screen as a progress report but the process is automatic and 
once started it does not require user's intervention. 

Summary of Contents for GSM-19






















































































































































Reviews:

No comments