manualshive.com logo in svg

GEM GSM-19, Instruction Manual, Page: 69 / 149

Share
Download
GEM GSM-19 Instruction Manual Download Page 69

68 

GSM19 Series Magnetometers - Version 7

 

 
 

 

GEM Systems, Inc. Advanced Magnetometers 

For more technical information, visit www.gemsys.ca 

IF YOU HAVE VERSION 6 AND VERSION 5 UNITS 

1.

 

Turn both units on. 

2.

 

Connect reduction cable. 

3.

 

Make sure the base unit is in its 

main menu

. 

4.

 

From 

main menu

 press 

B-diurn.cor 

on the mobile/grad/walk/walkgrad unit.  If there is more 

than one file in memory, select the relevant one and press 

F-ok

. If the mobile is the version 6 

unit it displays 

 

SCREEN 64

 

 
                        connect cable 
                                and 
               set base mag to main menu 
                                                                 F 

 

 

5.

 

Press 

F

 

6.

 

The software automatically searches the base for the file with the correct date and time and 
transfers its data. 

7.

 

Press 

1C 

to return to the main menu. 

 

Version 5 and version 6 magnetometers are fully compatible for unit to unit diurnal correction 
whether they are used as Base or Mobile. Older units however, may not be fully compatible with 
the version 6 magnetometers but you can always perform file-to-file correction using GEMLinkW.  

 

NOTE: 

When units older than version 5 are in use, it is advised to use File-to-File 
correction.  

This is because (in the event of incompatible file formats) the original mobile file 
may be damaged when combined with the base file. 

 

Summary of Contents for GSM-19






















































































































































Reviews:

No comments