manualshive.com logo in svg

GEM GSM-19, Instruction Manual, Page: 66 / 149

Share
Download
GEM GSM-19 Instruction Manual Download Page 66

65 

GSM19 Series Magnetometers - Version 7

 

 
 

 

GEM Systems, Inc. Advanced Magnetometers 

For more technical information, visit www.gemsys.ca 

•

 

If none of the units is equipped with GPS, set the time manually in one of them 
and use the synch cable to transfer the time to the other. In this case, both 
units run on their respective internal timers. 

5.8.2 Transferring the Time 

To transfer the time, from the 

Main Menu

 press

 E-time-synch

 on EACH unit. The following 

screen is displayed. 

 

SCREEN 57

 

   

connect cable 
 
& press C

 

 

 

 

Connect the 6-pin to 6-pin cable between the two units.   

NOTE: 

The same cable is used for diurnal correction. This is why sometimes it is called 
Reduction Cable and sometimes Synch cable.  Please contact GEM Systems if you 
need to order one. 

Press 

C

. 

The following screen is displayed.

 

 

SCREEN 58

 

 
A-source 
B-destination 
enter destination first

 

 

 

 

Summary of Contents for GSM-19






















































































































































Reviews:

No comments