Geko 12V 4000 G 41, Operating Instructions Manual

Page: 92 / 124

34 Lube Oil System
6.13.2 Engine oil change
Preconditions
Engine is stopped and starting disabled.
Engine is at operating temperature.
MTU Fluids and Lubricants Specification (A001061/..) is available.
Material
Designation / Use Part No. Qty.
Engine oil FLS
Spare parts
Designation / Use Part No. Qty.
Sealing ring SPC
WARNING
Hot engine oil.
Engine oil can contain combustion residues which are harmful to health.
Risk of injury and scalding!
Wear protective clothing, gloves, and goggles / safety mask.
Avoid contact with skin.
Do not inhale oil vapor.
Oil change without semirotary hand pump: Draining oil at drain plug on oil pan
1. Provide a suitable container in which to collect the oil.
2. Remove drain plug and drain oil.
3. Install drain plug with new sealing ring.
4. Replace engine oil filter ( Page 6 36).
Oil change using semirotary hand pump: Oil extraction
1. Provide a suitable container in which to collect the oil.
2. Extract all oil from oil pan using the hand pump.
3. Replace engine oil filter ( Page 6 36).
Engine oil system filling
1. Determine amount of engine oil required for oil
change ( Product Summary - Technical Data).
2. Open cover of filler neck.
3. Pour oil in at filler neck up to "max." mark at oil
dipstick.
4. Close cover of filler neck.
5. Check oil level ( Page 6 35).
6. After oil change and oil filter replacement, bar
engine with starting system ( Page 6 1).
M015403/00E 02-09 © MTU
www.generent.ru