Gefen 4K ULTRAHD EXT-UHD-88 User Manual Download Page 23

Page: 23 / 204

page | 11

tting S

tar

ted

Installation

Network Configuration using Syner-G

1. Launch the Gefen Syner-G application.

Download the application here:

http://www.gefen.com/support/download.jsp

2. Select the matrix (EXT-UHD-88) from the list of products.

3. Under the Device Settings section, select either Static or DHCP from the IP Mode

drop-down list.

► Select

Static

to manual enter the IP address, subnet mask, and gateway IP.

Consult with your network administrator, if necessary.

► Select

DHCP

to let the DHCP server automatically assign the IP address, subnet

mask, and gateway IP.

Summary of Contents for 4K ULTRAHD EXT-UHD-88













































































































































































































Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands

Gefen 4K ULTRAHD EXT-UHD-88, User Manual

Search results

Summary of Contents for 4K ULTRAHD EXT-UHD-88

Reviews:

Related manuals for 4K ULTRAHD EXT-UHD-88

Brands by name

Popular brands